Tuesday, October 4, 2016

WWII German Paint Scheme

This is my basic paint list for WWII German Heer


All colors are Vallejo Model Color and designated by their number and name unless otherwise specified.

Flesh: Scale Color Basic Flesh or 955 Flat Flesh
Tunic and Pants: 830 German Field Grey (Note, some trousers can be 867 Dark Bluegrey)
Helmets and some collars: 979 German Camo Dark Green
Collar Tabs: 918 Ivory or 950 Black for Pioneers
Soft side caps: 867 Dark Bluegrey
Webbing: 950 Black
Straps on Pioneer packs: 988 Khaki
Shovel case/surround and boots: 950 Black
Bread bag: 886 Green Grey
Gas mask canister and anklets: 979 German Camo Dark Green
Canteen Cover: 984 Flat Brown
Gas cap and stick grenade heads: 867 Dark Bluegreay
Gas mask and Pioneer Packs: 886 Green Grey
Blanket rolls: 821 German Camo Beige
Rifle wood: 984 Flat Brown
Rifle metal, smgs, and MGs: P3 Pig Iron

These are the base colors I use, but there are always variations among the uniform colors and from the effects of fading.  But, if you're looking for a place to start painting German figures, this should help.

Saturday, August 13, 2016

Rubicon Hetzer

I built the Rubicon Hetzer and painted it using a circle ambush camo scheme.

The Rubicon Hetzer is a great kit, and it went together well.  The only criticism I have is the one hatch should be added to the model earlier in the build to avoid potentially dropping it inside a fully enclosed chassis.  Other than that, this kit went together very well and provided an excellent opportunity to try one of the more difficult camouflage schemes.

I like to add weight to my plastic kits to give them a little more heft on the tabletop.  Here, I glued some pinewood derby weights in the the lower hull.

I decided to hold off on adding the treads and wheels to the body until after prime and base color painting
Part B13, the hatch, is the one thing I think should be added earlier  (in Step 3) to the upper hull.  I didn't drop it into the hull, but it could have easily happened.
I think Step 3 is a better place to add the hatch, part B13.
Primed

Base color added and tread assemble attached.  
Creating a mask for the circle camo pattern.  I find that if I attach a piece of blue painter tape to wax paper, I can cut the stencil/mask out easily, remove the tape, and still have enough adhesive on it to attach it to the model.  The wax paper prevents the tools from sticking to the tape as you cut the stencil.
I used a 1/8-inch hole punch to create the camo patterns.


Started attaching the stencil to the vehicle


Airbrushed the camo colors
Carefully removed the tape


Finished painting, adding decals, and weathering




Immobilized Markers

Here's a super simple project that could add a nice detail to your next WWII game.

Using some tank treads from the Rubicon German Stowage Set 1, I created some immobilized markers to indicate when tracked vehicles have been, well, immobilized.

There isn't much of a "how to" with this project; I basically glued some of the tank treads from the Rubicon German Stowage Set to some bases, primed, painted, and added flock.  The pictures tell the story.

The stowage set is awesome, and it will add a lot of detail to several models.



Some finished markers
Place the markers behind your immobilized vehicle to mark it as such.




Sunday, August 7, 2016

Speed Painting

I decided to tackle an experimental project I've been considering for some time.  I wanted to try painting figures on the sprue prior to assembly.  This allows for a lot more airbrush work and faster painting.  The big question I had was, "how bad would the final product look?"

I decided to start small and paint a sprue of Warlord U.S. Infantry and a sprue of U.S. weapons.  This results in five figures and a lot of extra arms, heads, weapons, kit, etc.

In the end, the five figures took 2.5 hours to paint, assemble, and base.  I think adding a few more sprues will take advantage of the economy of scale, and my estimate is 20 figures in 5 to 6 hours.  That will be the next experiment.

I started by painting uniforms, heads, arms, and hands.  The paints used are all Vallejo model color except as noted, and I used a Grex airbrush with a 0.3 mm needle for all the airbrush work.

Colors used:
Trousers: 873 US Field Drab
Jackets and Anklets: 988 Khaki
Boots: 984 Flat Brown
Backpacks, webbing, and pouches: 886 Green Grey
Helmets: 887 Brown Violet
Rifles: 875 Beige Brown and P3's Pig Iron

Painting Uniforms

Rifle base color

Back packs, webbing, shovels

I mounted the legs/torsos to their bases, and at that point, I hand painted all the straps and boots.  The rest of the uniforms had already been airbrushed.

The metallic parts of the rifles were painted by hand while still on the sprue.  Sorry for no pictures of those two steps.

I then assembled the figures and found very few places that needed any hand painted touchups.

I decided to use Army Painter Strong Tone Dip to provide the shading to keep with the theme of speed painting.

Painted and assembled

The dip was allowed to dry overnight, and then the I based the figures.

Below are the finished figures.  I think, considering the method used, they came out pretty well.  They pass the 3-foot, tabletop test.






Thursday, July 28, 2016

Rubicon Crusader

I recently finished the Rubicon A15 Crusader, and I'm very pleased with the detail and versatility of the kit.  It went together very nicely, and with a little bit of ingenuity, I was able to create two unique versions of the Crusader from the box.

Great kit that assembled very easily with little clean up.

Using some InstantMold, I cast an extra turret box.
Original and green stuff casting

The second turret box allowed me to build two complete turrets of the Crusader

Although it can't be seen, I added a magnet under the one hatch to allow the secondary turret to be added to represent the additional weapon.  


 Some finished shots below.  I added an antenna with the pennants showing the color/order of the day.





Warlord LRDG Truck

I completed the Warlord LRDG Truck - photos highlight the layering and shading of the monochrome paint scheme and culminate with some dusty weathering.  This is a fantastic kit with a good deal of detail, and the cargo provides for some variety of materials and colors to give the model unique desert character.

The metal and resin kit went together well, with little clean up.



Base colors added with some fading - work on the figures underway
Figure base colors complete and ready for shading and highlighting

Figures complete

 I failed to take more interim photos, but below is the "walk around" of the final piece.  Note the sun fading on the metal surfaces and areas where the blowing sand has rubbed away all the paint.